Vacuum (anoxic) Anoxic Nitrogen Sterilization System

• Protection: Shock Resistance
• Installation: Hanging
• Housing: Aviation Materials
• Model NO.: SS-200DD
• HS Code: 0000000000
• Production Capacity: 5000/Year

Product Description

Working principle: pure physical method, through vacuum filling nitrogen oxygen, pressure loss, steam
Hair, insecticide, sterilization, disinfection, midway do not add any medicine, do not discharge any harmful
Gases and pollutants are currently the most environmentally friendly products in the domestic market.

Customers should consider the following factors comprehensively when selecting the equipment for vacuum insecticidal sterilization and disinfection of archives: the number of files to be processed daily, the size of disinfection room, the equipment to be put upstairs, and check whether the elevator can check the weight of the equipment and the width of the corridor and disinfection room door in advance. The floor of the disinfection room building bears the load. Vacuum box material: stainless steel, carbon steel, aviation, transparent materials, voltage: 380V.

Vacuum nitrogen filled insecticidal sterilizer
function:

(1) oxygen isolation function: ensure that the oxygen content of the equipment in the working state is ≤1‰. Self - made nitrogen by matching nitrogen machine.
(2) evaporation function: during the disinfection process, liquid in the insect body can evaporate and destroy the protein of the adult, larva, egg and pupa.
(3) low temperature function: along with the disinfection process, the water in the insect body can evaporate a lot, and the surface temperature of the insect body drops sharply.
(4) insect-killing function: it can kill 100% adults, larvae, eggs, pupae and spores in the collection.
(5) sterilization function: it can kill oxygen-consuming bacteria 100%, and prevent the growth, breeding and growth of anaerobic bacteria and filamentous molds.
To breed.
(6) dust removal function: can remove 100% of cultural relics, archives, ancient books and other dust attached to the surface.
(7) odor elimination function: can eliminate all odor 100%.
(8) freezing insecticidal and sterilizing function: it can be used in cryogenic freezing alone. After starting, the vacuum sterilization room temperature will reach -65ºC for 10 times
Minutes. (optional)

1. Remote control function: you can operate on-site equipment, parameter screen and touch screen through mobile phone APP software (any area of the network)

A cause. (optional)

1. Automatic humidification function: when nitrogen is injected into the disinfection room, it can be humidified through the automatic humidifier to ensure the humidity in the disinfection room

Between 35% and 60%, humidity can be set from 0% to 100%.
(11) nitrogen production function: 99.99% high purity nitrogen can be produced by ourselves in the disinfection process and injected into the disinfection room.
(12) oxygen content, vacuum degree, temperature and humidity detection and display function.
(13) the whole disinfection time is between 15 hours and 72 hours.


SPEC:

1, volume 0.5-100 cubic, 304 stainless steel or carbon steel Q235 material, aviation material.
2. Working voltage: AC380V(three-phase five-wire), that is, A, B, C three addition N(zero), E(ground) line.
3. Equipment structure: vacuum disinfection chamber, nitrogen making machine (built-in air compressor, freeze dryer, gas storage tank) vacuum pump and
PLC control system is composed of the above combination into an all-in-one machine.
4. Working pressure: 0.2kg /cm2.
5. Working vacuum: 100PA.
6. Working mode: manual mode or automatic mode.
7, nitrogen injection: through the program automatic injection replacement.
8, nitrogen source: nitrogen machine.
9. Door opening and closing: manual mechanical transmission mechanism.
10. Power consumption: ≤8KW.
11, vacuum pump: water treatment >100-500g/h, vacuum pump pumping speed 4-63l /S, vacuum pump noise less than 50dB.
12. Nitrogen making machine: pressure swing adsorption nitrogen making system is adopted. Nitrogen production per hour is more than 5M3 and the purity of nitrogen is 99.99%.
Noise is less than 56dB.

1. Temperature and humidity sensor and vacuum sensor: temperature and humidity sensor is in the process of disinfection, control files in the disinfection room

Humidity. Vacuum sensor can accurately measure positive and negative pressure.

1. Vacuum detector: can accurately measure the positive and negative pressure, with a direct connection vacuum pump, vacuum pump installed oil mist filter, noise

Filter.
Nitrogen content measuring instrument: a special instrument for measuring oxygen content, used for measuring oxygen content in disinfection. The measurement is required to be pure 99.99%.
16. Requirements for vacuum nitrogen-filled disinfection equipment: the main body of the equipment is a bookcase container, with a moving car that can go directly to and from the warehouse.
17. Door sealing: the "O" rubber ring in the dovetail groove on the fixed flange is required to realize the sealing of positive pressure and negative pressure.
18. When the equipment is well positioned, there are two supporting feet to adjust the level to make the equipment stable.
19. The material of disinfection room is USU304 stainless steel, the disinfection room is matt, and the surface is treated with USU304 stainless steel. disinfection
The chamber is connected with the vacuum pump through stainless steel bellows.

1. The work of the whole equipment should be programmed by PLC, automatically monitored and controlled. Equipped with automatic, manual two sets of operation, open the general

When the power supply enters the automatic working state, it automatically completes, locks the door, vacuums, makes nitrogen, fills nitrogen, fills nitrogen to replace, from
Dynamic pressure protection, automatic air release, all parameters can be displayed by touching the display screen. Manual operation can be a single operation to open the door, close the door,
Unlocking, locking, vacuuming, making nitrogen, filling nitrogen and releasing gas. To meet the needs of various states. Complete control system
By the international well-known brand electrical components.
21. The equipment covers an area of 8-30m2

Main technical requirements and parameters of vacuum nitrogen charging


Safe:

(1) the nitrogen making machine is equipped with a built-in safety valve, which can automatically discharge pressure when the gas is overpressurized.
(2) the air storage tank is equipped with a safety valve. When the pressure exceeds 0.8mpa, the safety valve will open automatically to ensure the gas pressure within 0.8mpa in the air storage tank.
(3) the vacuum sterilizing room is equipped with a safety valve and an automatic programmed pressure relief system. The pressure in the vacuum sterilizing room is guaranteed to be below 1000 torr, and the safety factor is improved by 2 levels.
(4) the pressure sensor and the temperature and humidity sensor are equipped with original high-precision products, and the technical indexes are much higher than those of ordinary products. The data communication is stable to ensure the safety and working accuracy of the equipment.
(5) failure alarm display of main equipment can automatically cut off the main power supply through the program and alarm display. Accurate display of failure items.
(6) in the process of disinfection, when vacuuming, humidity in the disinfection chamber changes with the decrease of vacuum degree. In the process of nitrogen filling, there is an automatic humidifier at the front of the disinfection chamber injected with nitrogen to make up for the humidity lost during vacuuming, and the humidity value can be adjusted by the user.
(7) this device does not have a series of safety hazards in the process of use. What the nitrogen making machine inhales is air, and what it discharges is nitrogen and oxygen, which do no harm to human body. This equipment is atmospheric pressure container, environmental protection products, so please rest assured to use.
(8) equipment noise: ≤65db.
(9) provide the equipment model and specification vacuum disinfection room test in accordance with tsg21-2016 safety and technical supervision regulations for fixed pressure vessels, issue the test report issued by the third-party testing agency and provide the original qualification certificate of the testing agency.